[mirrors/Programs.git] / c / tv-b-gone / Makefile

# MCU name\r
MCU = attiny85\r
F_CPU = 8000000\r
\r
# Output format. (can be srec, ihex, binary)\r
FORMAT = ihex \r
\r
# Target file name (without extension).\r
TARGET = tvbgone\r
\r
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.\r
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)\r
OPT = s\r
\r
# List C source files here. (C dependencies are automatically generated.)\r
SRC = main.c NAcodes.c #util.c\r
\r
# List Assembler source files here.\r
# Make them always end in a capital .S.  Files ending in a lowercase .s\r
# will not be considered source files but generated files (assembler\r
# output from the compiler), and will be deleted upon "make clean"!\r
# Even though the DOS/Win filesystem matches both .s and .S the same,\r
# it will preserve the spelling of the filenames, and gcc itself does\r
# care about how the name is spelled on its command-line.\r
# Optional compiler flags.\r
#  -g:        generate debugging information (for GDB, or for COFF conversion)\r
#  -O*:       optimization level\r
#  -f...:     tuning, see gcc manual and avr-libc documentation\r
#  -Wall...:  warning level\r
#  -Wa,...:   tell GCC to pass this to the assembler.\r
#    -ahlms:  create assembler listing\r
CFLAGS = -g -O$(OPT) \\r
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \\r
-Wall -Wstrict-prototypes \\r
-DF_CPU=$(F_CPU) \\r
-Wa,-adhlns=$(<:.c=.lst) \\r
$(patsubst %,-I%,$(EXTRAINCDIRS))\r
\r
\r
# Set a "language standard" compiler flag.\r
#   Unremark just one line below to set the language standard to use.\r
#   gnu99 = C99 + GNU extensions. See GCC manual for more information.\r
#CFLAGS += -std=c89\r
#CFLAGS += -std=gnu89\r
#CFLAGS += -std=c99\r
CFLAGS += -std=gnu99\r
\r
\r
\r
# Optional assembler flags.\r
#  -Wa,...:   tell GCC to pass this to the assembler.\r
#  -ahlms:    create listing\r
#  -gstabs:   have the assembler create line number information; note that\r
#             for use in COFF files, additional information about filenames\r
#             and function names needs to be present in the assembler source\r
#             files -- see avr-libc docs [FIXME: not yet described there]\r
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs \r
\r
\r
\r
# Optional linker flags.\r
#  -Wl,...:   tell GCC to pass this to linker.\r
#  -Map:      create map file\r
#  --cref:    add cross reference to  map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
\r
\r
\r
# Additional libraries\r
\r
# Minimalistic printf version\r
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min\r
\r
# Floating point printf version (requires -lm below)\r
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt\r
\r
# -lm = math library\r
LDFLAGS += -lm\r
\r
\r
\r
# Programming support using avrdude. Settings and variables.\r
\r
# Programming hardware: alf avr910 avrisp bascom bsd \r
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500\r
#\r
# Type: avrdude -c ?\r
# to get a full listing.\r
#\r
#\r
\r
AVRDUDE_PROGRAMMER = usbtiny\r
AVRDUDE_PROGRAMMER = dt006\r
\r
#AVRDUDE_PORT = usb        # programmer connected to serial device\r
AVRDUDE_PORT = lpt1\r
\r
AVRDUDE_WRITE_FLASH = -B 1 -U flash:w:$(TARGET).hex\r
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep\r
\r
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)\r
\r
# Uncomment the following if you want avrdude's erase cycle counter.\r
# Note that this counter needs to be initialized first using -Yn,\r
# see avrdude manual.\r
#AVRDUDE_ERASE += -y\r
\r
# Uncomment the following if you do /not/ wish a verification to be\r
# performed after programming the device.\r
#AVRDUDE_FLAGS += -V\r
\r
# Increase verbosity level.  Please use this when submitting bug\r
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> \r
# to submit bug reports.\r
#AVRDUDE_FLAGS += -v -v\r
\r
\r
\r
\r
# ---------------------------------------------------------------------------\r
\r
# Define directories, if needed.\r
DIRAVR = c:/winavr\r
DIRAVRBIN = $(DIRAVR)/bin\r
DIRAVRUTILS = $(DIRAVR)/utils/bin\r
DIRINC = .\r
DIRLIB = $(DIRAVR)/avr/lib\r
\r
\r
# Define programs and commands.\r
SHELL = sh\r
\r
CC = avr-gcc\r
\r
OBJCOPY = avr-objcopy\r
OBJDUMP = avr-objdump\r
SIZE = avr-size\r
\r
\r
# Programming support using avrdude.\r
AVRDUDE = avrdude\r
\r
\r
REMOVE = rm -f\r
COPY = cp\r
\r
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex\r
ELFSIZE = $(SIZE) -A $(TARGET).elf\r
\r
\r
\r
# Define Messages\r
# English\r
MSG_ERRORS_NONE = Errors: none\r
MSG_BEGIN = -------- begin --------\r
MSG_END = --------  end  --------\r
MSG_SIZE_BEFORE = Size before: \r
MSG_SIZE_AFTER = Size after:\r
MSG_COFF = Converting to AVR COFF:\r
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:\r
MSG_FLASH = Creating load file for Flash:\r
MSG_EEPROM = Creating load file for EEPROM:\r
MSG_EXTENDED_LISTING = Creating Extended Listing:\r
MSG_SYMBOL_TABLE = Creating Symbol Table:\r
MSG_LINKING = Linking:\r
MSG_COMPILING = Compiling:\r
MSG_ASSEMBLING = Assembling:\r
MSG_CLEANING = Cleaning project:\r
\r
\r
\r
\r
# Define all object files.\r
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) \r
\r
# Define all listing files.\r
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)\r
\r
# Combine all necessary flags and optional flags.\r
# Add target processor to flags.\r
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)\r
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)\r
\r
\r
\r
# Default target.\r
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \\r
	$(TARGET).lss $(TARGET).sym sizeafter finished end\r
\r
\r
# Eye candy.\r
# AVR Studio 3.x does not check make's exit code but relies on\r
# the following magic strings to be generated by the compile job.\r
begin:\r
	@echo\r
	@echo $(MSG_BEGIN)\r
\r
finished:\r
	@echo $(MSG_ERRORS_NONE)\r
\r
end:\r
	@echo $(MSG_END)\r
	@echo\r
\r
\r
# Display size of file.\r
sizebefore:\r
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi\r
\r
sizeafter:\r
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi\r
\r
\r
\r
# Display compiler version information.\r
gccversion : \r
	@$(CC) --version\r
\r
\r
\r
\r
# Convert ELF to COFF for use in debugging / simulating in\r
# AVR Studio or VMLAB.\r
COFFCONVERT=$(OBJCOPY) --debugging \\r
	--change-section-address .data-0x800000 \\r
	--change-section-address .bss-0x800000 \\r
	--change-section-address .noinit-0x800000 \\r
	--change-section-address .eeprom-0x810000 \r
\r
\r
coff: $(TARGET).elf\r
	@echo\r
	@echo $(MSG_COFF) $(TARGET).cof\r
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof\r
\r
\r
extcoff: $(TARGET).elf\r
	@echo\r
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof\r
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof\r
\r
\r
\r
reset:\r
	$(AVRDUDE) $(AVRDUDE_FLAGS)\r
\r
# Program the device.  \r
program: $(TARGET).hex $(TARGET).eep\r
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
full: $(TARGET).hex\r
	make burn-fuse\r
	make program\r
\r
burn-fuse:\r
	$(AVRDUDE) $(AVRDUDE_FLAGS) -B 250 -u -U lfuse:w:0xfd:m -U hfuse:w:0xde:m\r
\r
read-fuse:\r
	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U lfuse:r:l.txt:r\r
	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U hfuse:r:h.txt:r\r
	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U efuse:r:e.txt:r\r
# Create final output files (.hex, .eep) from ELF output file.\r
%.hex: %.elf\r
	@echo\r
	@echo $(MSG_FLASH) $@\r
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@\r
\r
%.eep: %.elf\r
	@echo\r
	@echo $(MSG_EEPROM) $@\r
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \\r
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@\r
\r
# Create extended listing file from ELF output file.\r
%.lss: %.elf\r
	@echo\r
	@echo $(MSG_EXTENDED_LISTING) $@\r
	$(OBJDUMP) -h -S $< > $@\r
\r
# Create a symbol table from ELF output file.\r
%.sym: %.elf\r
	@echo\r
	@echo $(MSG_SYMBOL_TABLE) $@\r
	avr-nm -n $< > $@\r
\r
\r
\r
# Link: create ELF output file from object files.\r
.SECONDARY : $(TARGET).elf\r
.PRECIOUS : $(OBJ)\r
%.elf: $(OBJ)\r
	@echo\r
	@echo $(MSG_LINKING) $@\r
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)\r
\r
\r
# Compile: create object files from C source files.\r
%.o : %.c\r
	@echo\r
	@echo $(MSG_COMPILING) $<\r
	$(CC) -c $(ALL_CFLAGS) $< -o $@\r
\r
\r
# Compile: create assembler files from C source files.\r
%.s : %.c\r
	$(CC) -S $(ALL_CFLAGS) $< -o $@\r
\r
\r
# Assemble: create object files from assembler source files.\r
%.o : %.S\r
	@echo\r
	@echo $(MSG_ASSEMBLING) $<\r
	$(CC) -c $(ALL_ASFLAGS) $< -o $@\r
\r
\r
\r
\r
\r
\r
# Target: clean project.\r
clean: begin clean_list finished end\r
\r
clean_list :\r
	@echo\r
	@echo $(MSG_CLEANING)\r
	$(REMOVE) $(TARGET).hex\r
	$(REMOVE) $(TARGET).eep\r
	$(REMOVE) $(TARGET).obj\r
	$(REMOVE) $(TARGET).cof\r
	$(REMOVE) $(TARGET).elf\r
	$(REMOVE) $(TARGET).map\r
	$(REMOVE) $(TARGET).obj\r
	$(REMOVE) $(TARGET).a90\r
	$(REMOVE) $(TARGET).sym\r
	$(REMOVE) $(TARGET).lnk\r
	$(REMOVE) $(TARGET).lss\r
	$(REMOVE) $(OBJ)\r
	$(REMOVE) $(LST)\r
	$(REMOVE) $(SRC:.c=.s)\r
	$(REMOVE) $(SRC:.c=.d)\r
\r
\r
# Automatically generate C source code dependencies. \r
# (Code originally taken from the GNU make user manual and modified \r
# (See README.txt Credits).)\r
#\r
# Note that this will work with sh (bash) and sed that is shipped with WinAVR\r
# (see the SHELL variable defined above).\r
# This may not work with other shells or other seds.\r
#\r
%.d: %.c\r
	set -e; $(CC) -MM $(ALL_CFLAGS) $< \\r
	| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \\r
	[ -s $@ ] || rm -f $@\r
\r
\r
# Remove the '-' if you want to see the dependency files generated.\r
-include $(SRC:.c=.d)\r
\r
\r
\r
# Listing of phony targets.\r
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \\r
	clean clean_list program\r
Commit	Line	Data
	1	# MCU name\r
	2	MCU = attiny85\r
	3	F_CPU = 8000000\r
	4	\r
	5	# Output format. (can be srec, ihex, binary)\r
	6	FORMAT = ihex \r
	7	\r
	8	# Target file name (without extension).\r
	9	TARGET = tvbgone\r
	10	\r
	11	# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.\r
	12	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)\r
	13	OPT = s\r
	14	\r
	15	# List C source files here. (C dependencies are automatically generated.)\r
	16	SRC = main.c NAcodes.c #util.c\r
	17	\r
	18	# List Assembler source files here.\r
	19	# Make them always end in a capital .S. Files ending in a lowercase .s\r
	20	# will not be considered source files but generated files (assembler\r
	21	# output from the compiler), and will be deleted upon "make clean"!\r
	22	# Even though the DOS/Win filesystem matches both .s and .S the same,\r
	23	# it will preserve the spelling of the filenames, and gcc itself does\r
	24	# care about how the name is spelled on its command-line.\r
	25	# Optional compiler flags.\r
	26	# -g: generate debugging information (for GDB, or for COFF conversion)\r
	27	# -O*: optimization level\r
	28	# -f...: tuning, see gcc manual and avr-libc documentation\r
	29	# -Wall...: warning level\r
	30	# -Wa,...: tell GCC to pass this to the assembler.\r
	31	# -ahlms: create assembler listing\r
	32	CFLAGS = -g -O$(OPT) \\r
	33	-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \\r
	34	-Wall -Wstrict-prototypes \\r
	35	-DF_CPU=$(F_CPU) \\r
	36	-Wa,-adhlns=$(<:.c=.lst) \\r
	37	$(patsubst %,-I%,$(EXTRAINCDIRS))\r
	38	\r
	39	\r
	40	# Set a "language standard" compiler flag.\r
	41	# Unremark just one line below to set the language standard to use.\r
	42	# gnu99 = C99 + GNU extensions. See GCC manual for more information.\r
	43	#CFLAGS += -std=c89\r
	44	#CFLAGS += -std=gnu89\r
	45	#CFLAGS += -std=c99\r
	46	CFLAGS += -std=gnu99\r
	47	\r
	48	\r
	49	\r
	50	# Optional assembler flags.\r
	51	# -Wa,...: tell GCC to pass this to the assembler.\r
	52	# -ahlms: create listing\r
	53	# -gstabs: have the assembler create line number information; note that\r
	54	# for use in COFF files, additional information about filenames\r
	55	# and function names needs to be present in the assembler source\r
	56	# files -- see avr-libc docs [FIXME: not yet described there]\r
	57	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs \r
	58	\r
	59	\r
	60	\r
	61	# Optional linker flags.\r
	62	# -Wl,...: tell GCC to pass this to linker.\r
	63	# -Map: create map file\r
	64	# --cref: add cross reference to map file\r
	65	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
	66	\r
	67	\r
	68	\r
	69	# Additional libraries\r
	70	\r
	71	# Minimalistic printf version\r
	72	#LDFLAGS += -Wl,-u,vfprintf -lprintf_min\r
	73	\r
	74	# Floating point printf version (requires -lm below)\r
	75	#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt\r
	76	\r
	77	# -lm = math library\r
	78	LDFLAGS += -lm\r
	79	\r
	80	\r
	81	\r
	82	# Programming support using avrdude. Settings and variables.\r
	83	\r
	84	# Programming hardware: alf avr910 avrisp bascom bsd \r
	85	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500\r
	86	#\r
	87	# Type: avrdude -c ?\r
	88	# to get a full listing.\r
	89	#\r
	90	#\r
	91	\r
	92	AVRDUDE_PROGRAMMER = usbtiny\r
	93	AVRDUDE_PROGRAMMER = dt006\r
	94	\r
	95	#AVRDUDE_PORT = usb # programmer connected to serial device\r
	96	AVRDUDE_PORT = lpt1\r
	97	\r
	98	AVRDUDE_WRITE_FLASH = -B 1 -U flash:w:$(TARGET).hex\r
	99	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep\r
	100	\r
	101	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)\r
	102	\r
	103	# Uncomment the following if you want avrdude's erase cycle counter.\r
	104	# Note that this counter needs to be initialized first using -Yn,\r
	105	# see avrdude manual.\r
	106	#AVRDUDE_ERASE += -y\r
	107	\r
	108	# Uncomment the following if you do /not/ wish a verification to be\r
	109	# performed after programming the device.\r
	110	#AVRDUDE_FLAGS += -V\r
	111	\r
	112	# Increase verbosity level. Please use this when submitting bug\r
	113	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> \r
	114	# to submit bug reports.\r
	115	#AVRDUDE_FLAGS += -v -v\r
	116	\r
	117	\r
	118	\r
	119	\r
	120	# ---------------------------------------------------------------------------\r
	121	\r
	122	# Define directories, if needed.\r
	123	DIRAVR = c:/winavr\r
	124	DIRAVRBIN = $(DIRAVR)/bin\r
	125	DIRAVRUTILS = $(DIRAVR)/utils/bin\r
	126	DIRINC = .\r
	127	DIRLIB = $(DIRAVR)/avr/lib\r
	128	\r
	129	\r
	130	# Define programs and commands.\r
	131	SHELL = sh\r
	132	\r
	133	CC = avr-gcc\r
	134	\r
	135	OBJCOPY = avr-objcopy\r
	136	OBJDUMP = avr-objdump\r
	137	SIZE = avr-size\r
	138	\r
	139	\r
	140	# Programming support using avrdude.\r
	141	AVRDUDE = avrdude\r
	142	\r
	143	\r
	144	REMOVE = rm -f\r
	145	COPY = cp\r
	146	\r
	147	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex\r
	148	ELFSIZE = $(SIZE) -A $(TARGET).elf\r
	149	\r
	150	\r
	151	\r
	152	# Define Messages\r
	153	# English\r
	154	MSG_ERRORS_NONE = Errors: none\r
	155	MSG_BEGIN = -------- begin --------\r
	156	MSG_END = -------- end --------\r
	157	MSG_SIZE_BEFORE = Size before: \r
	158	MSG_SIZE_AFTER = Size after:\r
	159	MSG_COFF = Converting to AVR COFF:\r
	160	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:\r
	161	MSG_FLASH = Creating load file for Flash:\r
	162	MSG_EEPROM = Creating load file for EEPROM:\r
	163	MSG_EXTENDED_LISTING = Creating Extended Listing:\r
	164	MSG_SYMBOL_TABLE = Creating Symbol Table:\r
	165	MSG_LINKING = Linking:\r
	166	MSG_COMPILING = Compiling:\r
	167	MSG_ASSEMBLING = Assembling:\r
	168	MSG_CLEANING = Cleaning project:\r
	169	\r
	170	\r
	171	\r
	172	\r
	173	# Define all object files.\r
	174	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) \r
	175	\r
	176	# Define all listing files.\r
	177	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)\r
	178	\r
	179	# Combine all necessary flags and optional flags.\r
	180	# Add target processor to flags.\r
	181	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)\r
	182	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)\r
	183	\r
	184	\r
	185	\r
	186	# Default target.\r
	187	all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \\r
	188	$(TARGET).lss $(TARGET).sym sizeafter finished end\r
	189	\r
	190	\r
	191	# Eye candy.\r
	192	# AVR Studio 3.x does not check make's exit code but relies on\r
	193	# the following magic strings to be generated by the compile job.\r
	194	begin:\r
	195	@echo\r
	196	@echo $(MSG_BEGIN)\r
	197	\r
	198	finished:\r
	199	@echo $(MSG_ERRORS_NONE)\r
	200	\r
	201	end:\r
	202	@echo $(MSG_END)\r
	203	@echo\r
	204	\r
	205	\r
	206	# Display size of file.\r
	207	sizebefore:\r
	208	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi\r
	209	\r
	210	sizeafter:\r
	211	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi\r
	212	\r
	213	\r
	214	\r
	215	# Display compiler version information.\r
	216	gccversion : \r
	217	@$(CC) --version\r
	218	\r
	219	\r
	220	\r
	221	\r
	222	# Convert ELF to COFF for use in debugging / simulating in\r
	223	# AVR Studio or VMLAB.\r
	224	COFFCONVERT=$(OBJCOPY) --debugging \\r
	225	--change-section-address .data-0x800000 \\r
	226	--change-section-address .bss-0x800000 \\r
	227	--change-section-address .noinit-0x800000 \\r
	228	--change-section-address .eeprom-0x810000 \r
	229	\r
	230	\r
	231	coff: $(TARGET).elf\r
	232	@echo\r
	233	@echo $(MSG_COFF) $(TARGET).cof\r
	234	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof\r
	235	\r
	236	\r
	237	extcoff: $(TARGET).elf\r
	238	@echo\r
	239	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof\r
	240	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof\r
	241	\r
	242	\r
	243	\r
	244	reset:\r
	245	$(AVRDUDE) $(AVRDUDE_FLAGS)\r
	246	\r
	247	# Program the device. \r
	248	program: $(TARGET).hex $(TARGET).eep\r
	249	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
	250	\r
	251	full: $(TARGET).hex\r
	252	make burn-fuse\r
	253	make program\r
	254	\r
	255	burn-fuse:\r
	256	$(AVRDUDE) $(AVRDUDE_FLAGS) -B 250 -u -U lfuse:w:0xfd:m -U hfuse:w:0xde:m\r
	257	\r
	258	read-fuse:\r
	259	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U lfuse:r:l.txt:r\r
	260	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U hfuse:r:h.txt:r\r
	261	$(AVRDUDE) $(AVRDUDE_FLAGS) -u -U efuse:r:e.txt:r\r
	262	# Create final output files (.hex, .eep) from ELF output file.\r
	263	%.hex: %.elf\r
	264	@echo\r
	265	@echo $(MSG_FLASH) $@\r
	266	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@\r
	267	\r
	268	%.eep: %.elf\r
	269	@echo\r
	270	@echo $(MSG_EEPROM) $@\r
	271	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \\r
	272	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@\r
	273	\r
	274	# Create extended listing file from ELF output file.\r
	275	%.lss: %.elf\r
	276	@echo\r
	277	@echo $(MSG_EXTENDED_LISTING) $@\r
	278	$(OBJDUMP) -h -S $< > $@\r
	279	\r
	280	# Create a symbol table from ELF output file.\r
	281	%.sym: %.elf\r
	282	@echo\r
	283	@echo $(MSG_SYMBOL_TABLE) $@\r
	284	avr-nm -n $< > $@\r
	285	\r
	286	\r
	287	\r
	288	# Link: create ELF output file from object files.\r
	289	.SECONDARY : $(TARGET).elf\r
	290	.PRECIOUS : $(OBJ)\r
	291	%.elf: $(OBJ)\r
	292	@echo\r
	293	@echo $(MSG_LINKING) $@\r
	294	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)\r
	295	\r
	296	\r
	297	# Compile: create object files from C source files.\r
	298	%.o : %.c\r
	299	@echo\r
	300	@echo $(MSG_COMPILING) $<\r
	301	$(CC) -c $(ALL_CFLAGS) $< -o $@\r
	302	\r
	303	\r
	304	# Compile: create assembler files from C source files.\r
	305	%.s : %.c\r
	306	$(CC) -S $(ALL_CFLAGS) $< -o $@\r
	307	\r
	308	\r
	309	# Assemble: create object files from assembler source files.\r
	310	%.o : %.S\r
	311	@echo\r
	312	@echo $(MSG_ASSEMBLING) $<\r
	313	$(CC) -c $(ALL_ASFLAGS) $< -o $@\r
	314	\r
	315	\r
	316	\r
	317	\r
	318	\r
	319	\r
	320	# Target: clean project.\r
	321	clean: begin clean_list finished end\r
	322	\r
	323	clean_list :\r
	324	@echo\r
	325	@echo $(MSG_CLEANING)\r
	326	$(REMOVE) $(TARGET).hex\r
	327	$(REMOVE) $(TARGET).eep\r
	328	$(REMOVE) $(TARGET).obj\r
	329	$(REMOVE) $(TARGET).cof\r
	330	$(REMOVE) $(TARGET).elf\r
	331	$(REMOVE) $(TARGET).map\r
	332	$(REMOVE) $(TARGET).obj\r
	333	$(REMOVE) $(TARGET).a90\r
	334	$(REMOVE) $(TARGET).sym\r
	335	$(REMOVE) $(TARGET).lnk\r
	336	$(REMOVE) $(TARGET).lss\r
	337	$(REMOVE) $(OBJ)\r
	338	$(REMOVE) $(LST)\r
	339	$(REMOVE) $(SRC:.c=.s)\r
	340	$(REMOVE) $(SRC:.c=.d)\r
	341	\r
	342	\r
	343	# Automatically generate C source code dependencies. \r
	344	# (Code originally taken from the GNU make user manual and modified \r
	345	# (See README.txt Credits).)\r
	346	#\r
	347	# Note that this will work with sh (bash) and sed that is shipped with WinAVR\r
	348	# (see the SHELL variable defined above).\r
	349	# This may not work with other shells or other seds.\r
	350	#\r
	351	%.d: %.c\r
	352	set -e; $(CC) -MM $(ALL_CFLAGS) $< \\r
	353	\| sed 's,\(.\)\.o[ :],\1.o \1.d : ,g' > $@; \\r
	354	[ -s $@ ] \|\| rm -f $@\r
	355	\r
	356	\r
	357	# Remove the '-' if you want to see the dependency files generated.\r
	358	-include $(SRC:.c=.d)\r
	359	\r
	360	\r
	361	\r
	362	# Listing of phony targets.\r
	363	.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \\r
	364	clean clean_list program\r