From: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Date: Sun, 10 Nov 2024 20:47:34 +0000 (+0100)
Subject: New planter
X-Git-Url: https://git.harvie.cz/?a=commitdiff_plain;ds=inline;p=mirrors%2FDesigns.git

New planter
---

diff --git a/openscad/planter5.scad b/openscad/planter5.scad
new file mode 100644
index 0000000..93ba35e
--- /dev/null
+++ b/openscad/planter5.scad
@@ -0,0 +1,72 @@
+module planter_cavity(void=0, da=65, db=84) {
+	rotate([0,0,10]) translate([0,0,14.1]) difference() {
+		hull() {
+			translate([0,0,73]) cylinder(d1=db-2, d2=db, h=10, $fn=9);
+			cylinder(d1=da-5, d2=da, h=5, $fn=64);
+		}
+		if(void) rotate([0,0,-10]) translate([0,0,-14.1+2.5]) scale([0.97,0.97,1]) planter_cavity();
+	}
+}
+
+module planter() {
+	difference() {
+		union() {
+			translate([0,0,15]) for (h = [0 : 1 : 2] ){
+				translate([0,0,h*31.5])
+				for (r = [0 : 40 : 360] ){
+					rotate([90,90,r+20*(h%2)])
+					difference() {
+						translate([0,0,37+h*3]) cylinder(d2=35, d1=47.5, h=7, $fn=6);
+						translate([0,0,42.5+h*3]) cylinder(d1=21, d2=50, h=10, $fn=6);
+					}
+				}
+			}
+			cylinder(d1=80, d2=98, h=94, $fn=64);
+	    }
+
+		translate([0,0,-50]) cylinder(d=140, h=50);
+		translate([0,0,2.5*31+15]) cylinder(d=140, h=50);
+		planter_cavity();
+	}
+	
+}
+
+module planter_mold(half=0) {
+difference() {
+	union() {
+		//translate([0,0,0.1]) cylinder(d=110, h=100);
+		translate([0,0,90]) cylinder(d=103, h=7, $fn=128);
+		translate([0,0,0.001]) rotate([0,0,90])
+			scale([1.03,1.03,1.001]) planter();
+		translate([-60,0,97/2]) cube([3,7,97], center=true);
+		translate([ 60,0,97/2]) cube([3,7,97], center=true);
+		translate([  0,0,97/2]) cube([120,4,96.99], center=true);
+	}
+	rotate([0,0,90]) planter();
+	rotate([0,0,90]) scale([1.005,1.005,1]) planter_cavity();
+	if(half == 1) translate([-100,0,0]) cube(200);
+	if(half == 2) translate([-100,-200,0]) cube(200);
+
+	//Screw holes
+	$fn=12;
+	translate([ 56, 0, 80]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+	translate([ 56, 0, 45]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+	translate([ 56, 0, 10]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+	translate([-56, 0, 80]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+	translate([-56, 0, 45]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+	translate([-56, 0, 10]) rotate([90,0,0]) cylinder(d=3.5, h=100, center=true);
+}
+}
+
+
+if(0) { //Just planter
+	planter();
+	//planter_cavity();
+} else {
+	planter_cavity(3);
+	//rotate([180,0,0]) {
+	mirror([0,0,1]) {
+		translate([0,-12,0]) planter_mold(half=1);
+		translate([0,12,0]) planter_mold(half=2);
+	}
+}
\ No newline at end of file