From: Tomas Mudrunka <tomas@mudrunka.cz>
Date: Fri, 12 Feb 2021 01:24:13 +0000 (+0100)
Subject: wire clamp prototype
X-Git-Url: https://git.harvie.cz/?a=commitdiff_plain;h=c37e952c22d8133f06eefe19adbbb05042a94afe;p=mirrors%2FDesigns.git

wire clamp prototype
---

diff --git a/openscad/hacek_na_topeni.scad b/openscad/hacek_na_topeni.scad
new file mode 100644
index 0000000..43a5817
--- /dev/null
+++ b/openscad/hacek_na_topeni.scad
@@ -0,0 +1,23 @@
+$fn=50;
+height = 15;
+
+difference() {
+hull(){
+cylinder(height,17.5,17.5);
+translate([45.8,0,0]) cylinder(height,17.5,17.5);
+}
+cylinder(height,13.5,13.5);
+translate([45.8,0,0]) cylinder(height,13.5,13.5);
+
+translate([16.5,-13.1,0]) cube([13,26.2, height]);
+}
+
+translate([-5,0,0]) difference() {
+hull(){
+
+translate([45.8,31,0]) cylinder(height,17.5,17.5);
+}
+translate([45.8,31,0]) cylinder(height,13.5,13.5);
+translate([7,5,0]) rotate([0,0,15]) cube([40,40, 40]);
+}
+
diff --git a/openscad/wire_clamp2.scad b/openscad/wire_clamp2.scad
new file mode 100644
index 0000000..24218a7
--- /dev/null
+++ b/openscad/wire_clamp2.scad
@@ -0,0 +1,57 @@
+$fn=50;
+
+wire_diameter = 1.5;
+wr = wire_diameter /2;
+
+bus_diameter = 1.6;
+br = bus_diameter / 2;
+
+module latch() {
+		hull() {
+cylinder(8,1.5,1.5);
+translate([10,0,0]) cylinder(8,2.5,2.5);
+	}
+	}
+
+module lever(hole=true) {
+
+difference() {
+latch();
+if(hole) translate([5.2,-4.5,0]) cylinder(8,5,5);
+}
+
+translate([10,-1,2.5]) rotate([0,0,8]) cube([8,3,3]);
+translate([17.5,2,0]) cylinder(8,2.5,2.5);
+
+}
+
+//lever(true);
+difference() {
+	translate([-0.5,0,0]) scale([1,1,0.9999]) minkowski() {
+		union() {
+		hull() {
+		 scale([1.1,1,1])latch();
+		 rotate([0,0,20]) scale([1.1,1,1]) latch();
+			translate([-2.1,0,0]) cylinder(8,1,1);
+	    }
+		
+	}
+		cylinder(0.000001,2,2);
+	}
+	translate([0,0,0]) lever(false);
+	translate([0,0,0]) rotate([0,0,20]) scale([1.1,1.1,1.1]) lever(false);
+	translate([12,-2,2]) rotate([0,0,26]) cube([8,9,4]);
+	translate([14.5,-5,0]) rotate([0,0,-1]) cube([8,9,8]);
+	
+	translate([-0.8,10,1.5]) rotate([90,0,0]) cylinder(20,wr,wr);
+	translate([-0.8,10,4]) rotate([90,0,0]) cylinder(20,wr,wr);
+	translate([-0.8,10,6.5]) rotate([90,0,0]) cylinder(20,wr,wr);
+	translate([-2.1,0,0]) cylinder(20,br,br);
+	
+}
+
+
+
+
+translate([0.6,0.3,0]) rotate([0,0,19])
+lever();
\ No newline at end of file