+++ /dev/null
-/*
-*/
-
-//Nastaveni bomby
-
-#define TIME_COUNTDOWN 600
-
-
-//Prirazeni pinu
-
-#define PIN_CABLE_CHECK 2
-
-#define PIN_KEY_CLK 3 //IRQ!
-#define PIN_KEY_DATA 4
-
-#define PIN_LED_R 5
-#define PIN_LED_G 6
-#define PIN_LED_B 7
-
-#define PIN_COIL_LO 10
-#define PIN_COIL_HI 11
-
-#define ADDR_DISPLAY 0x70
-
-//////////////////////////////////////////////////////////////////
-
-#include <PS2Keyboard.h>
-
-//#include <Wire.h> // Enable this line if using Arduino Uno, Mega, etc.
-#include <Adafruit_GFX.h>
-#include "Adafruit_LEDBackpack.h"
-
-PS2Keyboard keyboard;
-Adafruit_7segment display = Adafruit_7segment();
-
-void setup() {
- Serial.begin(9600);
- Serial.println("Keyboard Test:");
-
- keyboard.begin(PIN_KEY_DATA, PIN_KEY_CLK);
-
- display.begin(ADDR_DISPLAY);
- display.clear();
- //display.writeDisplay();
-
- pinMode(PIN_LED_R, OUTPUT);
- pinMode(PIN_LED_G, OUTPUT);
- pinMode(PIN_LED_B, OUTPUT);
- pinMode(PIN_COIL_LO, OUTPUT);
- pinMode(PIN_COIL_HI, OUTPUT);
- pinMode(PIN_CABLE_CHECK, INPUT_PULLUP);
-}
-
-void loop() {
- if (keyboard.available()) {
-
- // read the next key
- char c = keyboard.read();
-
- // check for some of the special keys
- if (c == PS2_ENTER) {
- Serial.println();
- } else {
- Serial.print(c);
- }
-
- if(digitalRead(PIN_CABLE_CHECK)) c+=16;
- display.print(c, HEX);
- display.drawColon(c%2);
- //display.setBrightness(random(0,15));
- display.setBrightness(0);
- //display.clear();
- display.writeDisplay();
-
-
- if(c%2) {
- analogWrite(PIN_LED_R, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_G, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_B, random(0,255)); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_COIL_HI, HIGH); // turn the LED on (HIGH is the voltage level)
- } else {
- digitalWrite(PIN_COIL_LO, HIGH); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_R, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_G, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_B, LOW); // turn the LED on (HIGH is the voltage level)
- }
- delay(random(1,15)); // wait for a second
- digitalWrite(PIN_COIL_LO, LOW); // turn the LED off by making the voltage LOW
- digitalWrite(PIN_COIL_HI, LOW); // turn the LED off by making the voltage LOW
-
- if(c == '.') {
- int d = random(100,1000);
- for(int i = 0; i < 1000; i++) {
-
- digitalWrite(PIN_COIL_LO, HIGH); //digitalWrite(11, HIGH);
- delayMicroseconds(d/2);
- digitalWrite(PIN_COIL_LO, LOW); //digitalWrite(11, LOW);
- delayMicroseconds(d/2);
- }
- }
- }
-
-
-}