+++ /dev/null
-/*
- * PS2 pinout cinskej kabel: data cerveny (18), clock bily (19), 5V cerny, GND zluty
- */
-
-#define SOFTSERIAL
-
-#ifndef SOFTSERIAL
-#include <ps2dev.h>
-PS2dev keyboard(19, 18); //clock, data
-#else
-#include <SoftwareSerial.h>
-//#include <NewSoftSerial.h>
-SoftwareSerial mySerial(18, 19);
-#endif
-
-#include <LedControl.h>
-
-LedControl lc=LedControl(16,14,15,2); //datain, clk, load, number of chips
-unsigned char dispbuf[32];
-
-#include <Keypad.h>
-
-int keyledPin = 3;
-
-const byte ROWS = 4; //four rows
-const byte COLS = 3; //four columns
-//define the cymbols on the buttons of the keypads
-char hexaKeys[ROWS][COLS] = {
- {'1','2','3'},
- {'4','5','6'},
- {'7','8','9'},
- {'*','0','#'}
-};
-byte rowPins[ROWS] = {10, 9, 8, 7}; //connect to the row pinouts of the keypad
-byte colPins[COLS] = {4, 5, 6}; //connect to the column pinouts of the keypad
-
-//initialize an instance of class NewKeypad
-Keypad customKeypad = Keypad( makeKeymap(hexaKeys), rowPins, colPins, ROWS, COLS);
-
-char scancodes[] = {0x45, 0x16, 0x1E, 0x26, 0x25, 0x2E, 0x36, 0x3D, 0x3E, 0x46, 0x7C, 0x7C}; //Scancodes for numbers 0-9, *, #
-
-void cleardisp(char val) {
- for(int i = 0; i<8; i++) dispbuf[i] = val;
-}
-
-void drawdisp(int shift) {
- lc.clearDisplay(0);
- for(int i = 0; i<8; i++) {
- if(shift) dispbuf[i] = dispbuf[i+1];
- if(dispbuf[i] != '_') lc.setDigit(0,7-i,dispbuf[i],false); //addr, digit, value, decimalpoint
- }
-}
-
-void intro() {
- cleardisp('_');
- for(int i = 0; i<100; i++) {
- analogWrite(keyledPin, i);
- if(i >= 20*1) dispbuf[3] = dispbuf[4] = 0;
- if(i >= 20*2) dispbuf[2] = dispbuf[5] = 0;
- if(i >= 20*3) dispbuf[1] = dispbuf[6] = 0;
- if(i >= 20*4) dispbuf[0] = dispbuf[7] = 0;
- drawdisp(0);
- delay(20);
- }
-}
-
-void outro() {
- cleardisp(0);
- for(int i = 100; i>=0; i--) {
- analogWrite(keyledPin, i);
- if(i <= 20*1) dispbuf[3] = dispbuf[4] = '_';
- if(i <= 20*2) dispbuf[2] = dispbuf[5] = '_';
- if(i <= 20*3) dispbuf[1] = dispbuf[6] = '_';
- if(i <= 20*4) dispbuf[0] = dispbuf[7] = '_';
- drawdisp(0);
- delay(20);
- }
-}
-
-
-void setup(){
- /*
- The MAX72XX is in power-saving mode on startup,
- we have to do a wakeup call
- */
- lc.shutdown(0,false);
- /* Set the brightness to a medium values */
- lc.setIntensity(0,15); //0 - 15
- /* and clear the display */
- lc.clearDisplay(0);
-
- intro();
- cleardisp('_'); drawdisp(0);
-
-#ifndef SOFTSERIAL
- // send the keyboard start up
- keyboard.keyboard_init();
-#else
- mySerial.begin(4800);
-#endif
-
- Serial.begin(9600);
-
-
-
- pinMode(LED_BUILTIN, OUTPUT);
-}
-
-void loop(){
- unsigned char leds;
-#ifndef SOFTSERIAL
- if(keyboard.keyboard_handle(&leds)) {
- //Serial.print('LEDS');
- //Serial.print(leds, HEX);
- digitalWrite(LED_BUILTIN, leds);
- }
-#endif
-
- char customKey = customKeypad.getKey();
-
- if (customKey){
- Serial.println(customKey);
- //analogWrite(keyledPin, random(0, 255));
- analogWrite(keyledPin, 255);
- unsigned char numkey = customKey-0x30;
- if(numkey < 10) {
-#ifndef SOFTSERIAL
- //Send PS2
- keyboard.keyboard_mkbrk(scancodes[numkey]);
-#else
- mySerial.print(customKey);
-#endif
-
- //Single digit
- //lc.setDigit(0,7,numkey,false); //addr, digit, value, decimalpoint
-
- //Scroll out display
- dispbuf[8] = numkey;
- drawdisp(1);
- }
- }
-
- if (customKey == '*') {
- //Send PS2
-#ifndef SOFTSERIAL
- keyboard.keyboard_mkbrk(scancodes[10]);
-#endif
-
- //analogWrite(keyledPin, 0);
- outro();
-
- cleardisp('_');
- drawdisp(0);
- }
-
- if (customKey == '#') {
-#ifndef SOFTSERIAL
- keyboard.keyboard_mkbrk(0x5A); //enter
-#endif
- }
-}
+++ /dev/null
-#include <LedControl.h>
-
-LedControl lc=LedControl(16,14,15,2); //datain, clk, load, number of chips
-
-/* we always wait a bit between updates of the display */
-unsigned long delaytime=250;
-
-void setup() {
- /*
- The MAX72XX is in power-saving mode on startup,
- we have to do a wakeup call
- */
- lc.shutdown(0,false);
- /* Set the brightness to a medium values */
- lc.setIntensity(0,15); //0 - 15
- /* and clear the display */
- lc.clearDisplay(0);
-}
-
-
-/*
- This method will display the characters for the
- word "Arduino" one after the other on digit 0.
- */
-void writeArduinoOn7Segment() {
- lc.setChar(0,0,'a',false);
- delay(delaytime);
- lc.setRow(0,0,0x05);
- delay(delaytime);
- lc.setChar(0,0,'d',false);
- delay(delaytime);
- lc.setRow(0,0,0x1c);
- delay(delaytime);
- lc.setRow(0,0,B00010000);
- delay(delaytime);
- lc.setRow(0,0,0x15);
- delay(delaytime);
- lc.setRow(0,0,0x1D);
- delay(delaytime);
- lc.clearDisplay(0);
- delay(delaytime);
-}
-
-/*
- This method will scroll all the hexa-decimal
- numbers and letters on the display. You will need at least
- four 7-Segment digits. otherwise it won't really look that good.
- */
-void scrollDigits() {
- for(int i=0;i<13;i++) {
- lc.setDigit(0,7,i,false);
- lc.setDigit(0,6,i+1,false);
- lc.setDigit(0,5,i+2,false);
- lc.setDigit(0,4,i+3,false);
- lc.setDigit(0,3,i+4,false);
- lc.setDigit(0,2,i+5,false);
- lc.setDigit(0,1,i+6,false);
- lc.setDigit(0,0,i+7,false);
- delay(delaytime);
- }
- lc.clearDisplay(0);
- delay(delaytime);
-}
-
-void loop() {
- writeArduinoOn7Segment();
- scrollDigits();
-}
+++ /dev/null
-#include <ps2dev.h>
-
-PS2dev keyboard(19, 18); //clock, data
-
-void make_break_kb(byte data)
-{
-// makes and breaks the key
- keyboard.write(data);
- delay(50);
- keyboard.write(0xF0);
- delay(50);
- keyboard.write(data);
- delay(50);
-}
-
-void setup() {
-}
-
-char scancodes[] = {0x45, 0x16, 0x1E, 0x26, 0x25, 0x2E, 0x36, 0x3D, 0x3E, 0x46, 0x7C, 0x7C}; //Scancodes for numbers 0-9, *, #
-
-void loop() {
- for(int i = 0; i < 11; i++) {
- make_break_kb(scancodes[i]);
- delay(1000);
- }
-}
+++ /dev/null
-/*
-*/
-
-//Nastaveni bomby
-
-#define TIME_COUNTDOWN 600
-
-
-//Prirazeni pinu
-
-#define PIN_CABLE_CHECK 2
-
-#define PIN_KEY_CLK 3 //IRQ!
-#define PIN_KEY_DATA 4
-
-#define PIN_LED_R 5
-#define PIN_LED_G 6
-#define PIN_LED_B 7
-
-#define PIN_COIL_LO 10
-#define PIN_COIL_HI 11
-
-#define ADDR_DISPLAY 0x70
-
-//////////////////////////////////////////////////////////////////
-
-#include <PS2Keyboard.h>
-
-//#include <Wire.h> // Enable this line if using Arduino Uno, Mega, etc.
-#include <Adafruit_GFX.h>
-#include "Adafruit_LEDBackpack.h"
-
-PS2Keyboard keyboard;
-Adafruit_7segment display = Adafruit_7segment();
-
-void setup() {
- Serial.begin(9600);
- Serial.println("Keyboard Test:");
-
- keyboard.begin(PIN_KEY_DATA, PIN_KEY_CLK);
-
- display.begin(ADDR_DISPLAY);
- display.clear();
- //display.writeDisplay();
-
- pinMode(PIN_LED_R, OUTPUT);
- pinMode(PIN_LED_G, OUTPUT);
- pinMode(PIN_LED_B, OUTPUT);
- pinMode(PIN_COIL_LO, OUTPUT);
- pinMode(PIN_COIL_HI, OUTPUT);
- pinMode(PIN_CABLE_CHECK, INPUT_PULLUP);
-}
-
-void loop() {
- if (keyboard.available()) {
-
- // read the next key
- char c = keyboard.read();
-
- // check for some of the special keys
- if (c == PS2_ENTER) {
- Serial.println();
- } else {
- Serial.print(c);
- }
-
- if(digitalRead(PIN_CABLE_CHECK)) c+=16;
- display.print(c, HEX);
- display.drawColon(c%2);
- //display.setBrightness(random(0,15));
- display.setBrightness(0);
- //display.clear();
- display.writeDisplay();
-
-
- if(c%2) {
- analogWrite(PIN_LED_R, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_G, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_B, random(0,255)); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_COIL_HI, HIGH); // turn the LED on (HIGH is the voltage level)
- } else {
- digitalWrite(PIN_COIL_LO, HIGH); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_R, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_G, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_B, LOW); // turn the LED on (HIGH is the voltage level)
- }
- delay(random(1,15)); // wait for a second
- digitalWrite(PIN_COIL_LO, LOW); // turn the LED off by making the voltage LOW
- digitalWrite(PIN_COIL_HI, LOW); // turn the LED off by making the voltage LOW
-
- if(c == '.') {
- int d = random(100,1000);
- for(int i = 0; i < 1000; i++) {
-
- digitalWrite(PIN_COIL_LO, HIGH); //digitalWrite(11, HIGH);
- delayMicroseconds(d/2);
- digitalWrite(PIN_COIL_LO, LOW); //digitalWrite(11, LOW);
- delayMicroseconds(d/2);
- }
- }
- }
-
-
-}
+++ /dev/null
-/*
-*/
-
-//Nastaveni bomby
-
-#define TIME_COUNTDOWN 600
-
-
-//Prirazeni pinu
-
-#define PIN_CABLE_CHECK 2
-
-#define PIN_KEY_CLK 3 //IRQ!
-#define PIN_KEY_DATA 4
-
-#define PIN_LED_R 5
-#define PIN_LED_G 6
-#define PIN_LED_B 7
-
-#define PIN_COIL_LO 10
-#define PIN_COIL_HI 11
-
-#define ADDR_DISPLAY 0x70
-
-//////////////////////////////////////////////////////////////////
-
-#include <PS2Keyboard.h>
-
-//#include <Wire.h> // Enable this line if using Arduino Uno, Mega, etc.
-#include <Adafruit_GFX.h>
-#include "Adafruit_LEDBackpack.h"
-
-PS2Keyboard keyboard;
-Adafruit_7segment display = Adafruit_7segment();
-
-void setup() {
- Serial.begin(9600);
- Serial.println("Keyboard Test:");
-
- keyboard.begin(PIN_KEY_DATA, PIN_KEY_CLK);
-
- display.begin(ADDR_DISPLAY);
- display.clear();
- //display.writeDisplay();
-
- pinMode(PIN_LED_R, OUTPUT);
- pinMode(PIN_LED_G, OUTPUT);
- pinMode(PIN_LED_B, OUTPUT);
- pinMode(PIN_COIL_LO, OUTPUT);
- pinMode(PIN_COIL_HI, OUTPUT);
- pinMode(PIN_CABLE_CHECK, INPUT_PULLUP);
-}
-
-void loop() {
- if (keyboard.available()) {
-
- // read the next key
- char c = keyboard.read();
-
- // check for some of the special keys
- if (c == PS2_ENTER) {
- Serial.println();
- } else {
- Serial.print(c);
- }
-
- if(digitalRead(PIN_CABLE_CHECK)) c+=16;
- display.print(c, HEX);
- display.drawColon(c%2);
- //display.setBrightness(random(0,15));
- display.setBrightness(0);
- //display.clear();
- display.writeDisplay();
-
-
- if(c%2) {
- analogWrite(PIN_LED_R, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_G, random(0,255)); // turn the LED on (HIGH is the voltage level)
- analogWrite(PIN_LED_B, random(0,255)); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_COIL_HI, HIGH); // turn the LED on (HIGH is the voltage level)
- } else {
- digitalWrite(PIN_COIL_LO, HIGH); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_R, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_G, LOW); // turn the LED on (HIGH is the voltage level)
- digitalWrite(PIN_LED_B, LOW); // turn the LED on (HIGH is the voltage level)
- }
- delay(random(1,15)); // wait for a second
- digitalWrite(PIN_COIL_LO, LOW); // turn the LED off by making the voltage LOW
- digitalWrite(PIN_COIL_HI, LOW); // turn the LED off by making the voltage LOW
-
- if(c == '.') {
- int d = random(100,1000);
- for(int i = 0; i < 1000; i++) {
-
- digitalWrite(PIN_COIL_LO, HIGH); //digitalWrite(11, HIGH);
- delayMicroseconds(d/2);
- digitalWrite(PIN_COIL_LO, LOW); //digitalWrite(11, LOW);
- delayMicroseconds(d/2);
- }
- }
- }
-
-
-}
+++ /dev/null
-/*
- * Exit Rum 2
- * (c) Tomas 'Harvie' Mudrunka 2018
- */
-
-//Nastaveni bomby
-
-#define DISARM_CODE "73138477"
-#define TIME_COUNTDOWN 600 //600
-//#define TIME_COUNTDOWN 15
-
-//Prirazeni pinu
-
-#define PIN_CABLE_CHECK 2
-
-#define PIN_KEY_CLK 3 //IRQ!
-#define PIN_KEY_DATA 4
-
-#define PIN_LED_G 5
-#define PIN_LED_B 6
-#define PIN_LED_R 7
-
-#define PIN_COIL_LO 10
-#define PIN_COIL_HI 11
-
-#define ADDR_DISPLAY 0x70
-
-//////////////////////////////////////////////////////////////////
-
-#define SOFTSERIAL
-
-#ifndef SOFTSERIAL
-#include <PS2Keyboard.h>
-PS2Keyboard keyboard;
-#else
-#include <SoftwareSerial.h>
-SoftwareSerial mySerial(PIN_KEY_CLK, PIN_KEY_DATA);
-#endif
-
-//#include <Wire.h> // Enable this line if using Arduino Uno, Mega, etc.
-#include <Adafruit_GFX.h>
-#include "Adafruit_LEDBackpack.h"
-
-Adafruit_7segment display = Adafruit_7segment();
-
-#define cnt_sec(s) (s%60)
-#define cnt_min(s) (s/60)
-#define cnt_dec(s) (cnt_min(s)*100+cnt_sec(s))
-
-void setup()
-{
- //Pripravime periferie
- Serial.begin(9600);
- Serial.println("zaciname");
-#ifndef SOFTSERIAL
- keyboard.begin(PIN_KEY_DATA, PIN_KEY_CLK);
-#else
- mySerial.begin(4800);
-#endif
- display.begin(ADDR_DISPLAY);
-
- pinMode(PIN_LED_R, OUTPUT);
- pinMode(PIN_LED_G, OUTPUT);
- pinMode(PIN_LED_B, OUTPUT);
- pinMode(PIN_COIL_LO, OUTPUT);
- pinMode(PIN_COIL_HI, OUTPUT);
- pinMode(PIN_CABLE_CHECK, INPUT_PULLUP);
-}
-
-int test_disarmed(int reset)
-{
-
- static int guessed = 0, disarmed = 0;
- if (reset) {
- guessed = 0;
- disarmed = 0;
- }
- //Cteme klavesnici
-#ifndef SOFTSERIAL
- while (keyboard.available()) {
- char c = keyboard.read();
- //Serial.print("Klavesa: ");
- //Serial.println(c);
-#else
- while (mySerial.available()) {
- char c = mySerial.read();
-#endif
-#ifndef SOFTSERIAL
- if (c == PS2_ENTER) {
- Serial.println();
- } else {
-#else
- if(1) {
-#endif
- Serial.print(c);
- }
-
- if (c < '0' || c > '9') {
- Serial.println("IGNORED!");
- continue;
-
- }
- if (c == DISARM_CODE[guessed]) {
- guessed++;
- Serial.println("\nGOT!");
- } else {
- guessed = 0;
- Serial.println("\nFAIL!");
- if (c == DISARM_CODE[guessed]) {
- guessed++;
- Serial.println("\nGOT!");
- }
- }
- if (DISARM_CODE[guessed] == 0) {
- disarmed = 1;
- Serial.println("\nDISARMED!");
- }
- }
-
- return disarmed;
-
-}
-
-void loop()
-{
- //Vynulujem periferie
- digitalWrite(PIN_COIL_LO, LOW);
- digitalWrite(PIN_COIL_HI, LOW);
- analogWrite(PIN_LED_R, 0);
- analogWrite(PIN_LED_G, 0);
- analogWrite(PIN_LED_B, 0);
-
- display.clear();
- display.setBrightness(15);
- display.writeDisplay();
-
-#ifndef SOFTSERIAL
- while (keyboard.available())
- keyboard.read();
-#else
- while (mySerial.available())
- mySerial.read();
-#endif
- test_disarmed(1);
-
- //Pockame na pripojeni kabelu
- display.print(0xCAB1, HEX);
- display.writeDisplay();
- while (digitalRead(PIN_CABLE_CHECK))
- delay(100);
-
- //Pockame na odpojeni kabelu
- display.clear();
- display.writeDisplay();
- while (!digitalRead(PIN_CABLE_CHECK))
- delay(100);
-
- //Odpocitavame
- for (int cnt = TIME_COUNTDOWN; cnt >= 0 && !test_disarmed(0); cnt--) {
- display.print(cnt_dec(cnt), DEC);
- display.drawColon((cnt + 1) % 2);
- display.writeDisplay();
-
- analogWrite(PIN_LED_R, random(0, 3));
- analogWrite(PIN_LED_G, random(0, 3));
- analogWrite(PIN_LED_B, random(0, 3));
-
- //Tikani / pipani
- tone(PIN_COIL_LO, 1000, 50);
- delay(60);
- digitalWrite(PIN_COIL_LO, HIGH);
- delay(40);
- digitalWrite(PIN_COIL_LO, LOW);
-
- delay(900);
-
- }
-
-
- while (!test_disarmed(0)) {
- //Bomba vybouchla
- int i;
-
- analogWrite(PIN_LED_R, random(0, 255));
- analogWrite(PIN_LED_G, random(0, 0));
- analogWrite(PIN_LED_B, random(0, 255));
-
- for (i = 0; i < 10; i++)
- display.writeDigitRaw(i, random(0, 255));
- display.setBrightness(random(0, 15));
- display.writeDisplay();
-
- digitalWrite(PIN_COIL_HI, HIGH);
- delay(20);
- digitalWrite(PIN_COIL_HI, LOW);
- int rnd = random(30, 100);
- tone(PIN_COIL_LO, random(100, 8000), rnd);
- delay(rnd);
- }
-
-
- //Bomba byla deaktivovana
- tone(PIN_COIL_LO, 3000, 500);
- delay(500);
- tone(PIN_COIL_LO, 5000, 500);
- analogWrite(PIN_LED_R, 0);
- analogWrite(PIN_LED_G, 0);
- analogWrite(PIN_LED_B, 0);
- display.print(0xDEFD, HEX);
- display.writeDisplay();
- delay(1000);
-
-
- //Pockame na zmenu kabelu
- char s = digitalRead(PIN_CABLE_CHECK);
- while (digitalRead(PIN_CABLE_CHECK) == s)
- delay(100);
-
-}
+++ /dev/null
-#include <Wire.h>
-#include <LiquidCrystal_I2C.h>
-#include <TM1637Display.h>
-
-// Module connection pins (Digital Pins)
-#define CLK 2
-#define DIO 3
-
-TM1637Display display(CLK, DIO);
-
-// Set the LCD address to 0x27 for a 16 chars and 2 line display
-LiquidCrystal_I2C lcd(0x3F, 16, 2);
-
-int i;
-
-void setup()
-{
- // initialize the LCD
- lcd.begin();
-
- // Turn on the blacklight and print a message.
- lcd.backlight();
- lcd.print("Rychta pyco!");
-
- display.setBrightness(0x0f);
- display.setColon(true);
- display.showNumberDec(23);
-
- pinMode(8, OUTPUT);
- pinMode(9, OUTPUT);
-
-}
-
-void loop()
-{
- digitalWrite(8, HIGH); // turn the LED on (HIGH is the voltage level)
- display.setColon(true);
- display.showNumberDec(i);
- delay(1000);
- digitalWrite(8, LOW); // turn the LED off by making the voltage LOW
- display.setColon(false);
- display.showNumberDec(i++);
- delay(1000);
-}
+++ /dev/null
-/*
- * Exit Rum
- * (c) Tomas 'Harvie' Mudrunka 2016
- */
-
-#include <Wire.h>
-#include <LiquidCrystal_I2C.h>
-#include <TM1637Display.h>
-
-#define TIMEOUT 300
-#define BEEP_FREQ 3000
-#define BEEP_LEN 50
-
-#define P_NASLAP 12
-#define P_PIEZO 35
-#define P_RELAY_1 9
-#define P_RELAY_2 8
-#define P_LEDSEG_CLK 2
-#define P_LEDSEG_DIO 3
-#define P_LEDSTRIP 11
-
-TM1637Display display(P_LEDSEG_CLK, P_LEDSEG_DIO);
-LiquidCrystal_I2C lcd(0x3F, 16, 2); //i2c addr, chars, lines
-
-#define JBASE 38
-#define JCOUNT 16
-
-#define J_A 0
-#define J_B 2
-#define J_C 4
-#define J_D 6
-#define J_E 8
-#define J_F 10
-#define J_G 12
-#define J_H 14
-#define J_1 1
-#define J_2 3
-#define J_3 5
-#define J_4 7
-#define J_5 9
-#define J_6 11
-#define J_7 13
-#define J_8 15
-
-boolean jumpers_read[JCOUNT][JCOUNT] = {0}, jumpers_secret[JCOUNT][JCOUNT] = {0};
-
-void jumper_store(int a, int b, boolean c) {
- jumpers_secret[min(a,b)][max(a,b)]=c;
-}
-
-void sound(char sndpin, float freq, float duration) { //Play bit-bang sound
- if(duration<=0) return; if(freq<=0) { delay(duration); return; }
- freq=((1000000/2)/freq); //Convert freq to delay (us)
- duration*=1000; //Convert duration to us
- pinMode(sndpin, OUTPUT);
- for(;duration>0;duration-=2*freq) {
- digitalWrite(sndpin, HIGH); delayMicroseconds(freq);
- digitalWrite(sndpin, LOW); delayMicroseconds(freq);
- }
- pinMode(sndpin, INPUT); //Close pin to avoid noise (optional)
-}
-
-int check_jumpers() {
- int i, j, check = 0, fail = 0;
-
- for(i=0;i<JCOUNT;i++) {
- pinMode(JBASE+i, OUTPUT);
- digitalWrite(JBASE+i, LOW);
- for(j=0;j<JCOUNT;j++) if(i<j) {
- pinMode(JBASE+j, INPUT_PULLUP);
- jumpers_read[i][j] = !digitalRead(JBASE+j);
- if(jumpers_read[i][j]) {
- check++;
- Serial.print(JBASE+i, DEC);
- Serial.print("->");
- Serial.print(JBASE+j, DEC);
- if(jumpers_secret[i][j]) {
- Serial.print("!");
- } else {
- fail++;
- }
- Serial.print(", ");
- }
- }
- pinMode(JBASE+i, INPUT_PULLUP);
- }
- Serial.println();
- check = fail ? -check : check;
- Serial.println(check, DEC);
- return check;
-}
-
-void setup() {
- jumper_store(J_A, J_5, true);
- jumper_store(J_B, J_4, true);
- jumper_store(J_C, J_7, true);
- jumper_store(J_D, J_2, true);
- jumper_store(J_E, J_6, true);
- jumper_store(J_F, J_8, true);
- jumper_store(J_G, J_1, true);
- jumper_store(J_H, J_3, true);
-
- pinMode(P_NASLAP, INPUT_PULLUP);
- pinMode(P_RELAY_1, OUTPUT);
- pinMode(P_RELAY_2, OUTPUT);
- pinMode(P_LEDSTRIP, OUTPUT);
-
- Serial.begin(9600);
- lcd.begin();
-}
-
-#define seconds_display(seconds) ((((seconds)/60)*100)+((seconds)%60))
-
-// the loop function runs over and over again forever
-void loop() {
- Serial.println("Inicializace systemu...");
-
- lcd.backlight();
- lcd.clear();
- lcd.print(" (c) SPOJE.NET");
- lcd.setCursor(0,1);
- lcd.print("Tomas@MudrunkaCZ");
-
- display.setBrightness(0x0f);
- display.setColon(true);
- display.showNumberDec(2323);
-
- delay(5000);
-
- lcd.noDisplay();
- lcd.noBacklight();
- display.setBrightness(0x00);
-
- display.setBrightness(0);
- display.showNumberDec(0);
-
- analogWrite(P_LEDSTRIP, 0);
- digitalWrite(P_RELAY_1, HIGH);
- digitalWrite(P_RELAY_2, HIGH);
-
- sound(P_PIEZO, BEEP_FREQ, BEEP_LEN);
- delay(BEEP_LEN);
- sound(P_PIEZO, BEEP_FREQ, BEEP_LEN);
- Serial.println("Cekam na aktivaci...");
- while(digitalRead(P_NASLAP));
-
- Serial.println("Sekvence aktivovana!");
-
- display.setBrightness(0x0f);
- for(int i=0;i<70;i++) {
- sound(P_PIEZO, random(500,10000), random(10,100));
- display.showNumberDec(random(1000,9999));
- analogWrite(P_LEDSTRIP, random(0,255));
- }
- sound(P_PIEZO, BEEP_FREQ, 2000);
-
- Serial.println("Odpocet aktivovan!");
- int timer = TIMEOUT;
- while(check_jumpers() != 8) {
- Serial.print("Zbyva: ");
- Serial.print(timer, DEC);
- Serial.println(" sekund");
- if(timer <= 0) {
- digitalWrite(P_RELAY_1, LOW);
- }
- display.setColon(timer%2);
- display.showNumberDec(seconds_display(timer));
- analogWrite(P_LEDSTRIP, map(timer%5, 0, 4, 255, 10));
- digitalWrite(P_RELAY_2, timer%2);
- if(timer>0) {
- timer--;
- sound(P_PIEZO, BEEP_FREQ, BEEP_LEN);
- delay(1000-BEEP_LEN);
- } else {
- analogWrite(P_LEDSTRIP, random(0,255));
- sound(P_PIEZO, random(500,10000), random(100,1000));
- }
- }
-
- Serial.println("Odpocet zastaven.");
- display.setColon(true);
- display.showNumberDec(seconds_display(timer));
- analogWrite(P_LEDSTRIP, 0);
- digitalWrite(P_RELAY_1, HIGH);
-
- //Muhammad Ismáil Árifi
- lcd.clear();
- lcd.print(" Muhammad");
- lcd.setCursor(0,1);
- lcd.print(" Ismail Arifi");
- lcd.backlight();
- lcd.display();
-
- Serial.println("Cekam na reset...");
- //while(digitalRead(P_NASLAP));
- while(check_jumpers() != 0) delay(1000);
-}
GIT.Harvie.CZ / mirrors / Programs.git / commitdiff
